Classic AutoAir Perfect Fit-Elite Series Betriebsanleitung PDF herunterladen (Seite 20)

SHROUD BOLTS

Install a few drops of mineral oil to the o-ring fittings, and secure.

Locate the Condenser, (2) right condenser mounting brackets

(short), and (4) #10 x 3/8” hex head screws.

Attach (1) bracket to the condenser 3rd hole from the top as

shown.

Attach the other bracket 4

hole from the bottom as shown

Remove and retain the (5) bolts that attach the hood latch

assembly.

Remove hood latch and set aside.

Loosen the radiator shroud bolts. These

bolts are located on both sides of the

radiator opening.

Slide condenser down in front of radiator.

Insert the brackets between the shroud and

the radiator bulkhead.

Locate the Condenser, (1) left condenser mounting

bracket (long), and (2) #10 x 3/8” hex head screws.

Slide bracket between shroud and the radiator

bulkhead. Attach (1) bracket to the condenser 4th

hole from the bottom as shown. Attach the bracket

to the condenser using the #10 screws.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 30 31

Keine Kommentare

Classic AutoAir Perfect Fit-Elite Series Betriebsanleitung Seite 20