Classic AutoAir Perfect Fit-Elite Series Betriebsanleitung PDF herunterladen (Seite 31)

IMPORTANT

CAUTION: WATER VALVE MUST BE INSTALLED PER

THE INSTRUCTIONS.

Classic Auto Air has done extensive testing on the correct method to install the water valve in order to get a

repeatable and progressive temperature control.

Locate the bottom connection from the evaporator/heater unit off of the firewall and attach a 6” piece of

5/8” dia. heater hose with the supplied hose clamp. Next attach the inlet side of the water valve using

another supplied hose clamp, (make sure the arrow on the water valve points toward the engine) Attach a

heater hose from the outlet side of the water valve and route to the connection on the water pump.

NOTE: WATER VALVE = WATER PUMP

CAUTION: WATER VALVE MUST BE INSTALLED ON HEATER LINE ROUTED TO

WATER PUMP.

NOTE: COMPRESSOR PURCHASED WITH KIT IS

SUPPLIED WITH THE CORRECT OIL CHARGE. DO NOT

ADD OIL TO SYSTEM.

134A SYSTEMS 24 oz OF REFRIGERANT

Recommend that power fuse is 25amp minimum

TO WATER PUMP FROM HEATER CORE

COOLANT FLOW

1 2 ... 26 27 28 29 30 31

Keine Kommentare

Classic AutoAir Perfect Fit-Elite Series Betriebsanleitung Seite 31