Classic AutoAir Perfect Fit-Elite Series Betriebsanleitung PDF herunterladen (Seite 8)

DRAIN COOLANT FROM RADIATOR.

Remove Heater hoses from heater coil at

firewall.

Disconnect electrical plug at

resistor.

Pull heater assembly away

from the firewall.

Disconnect the (2) control

cables from the box. Discard

the heater and the mounting

hardware.

Locate wire assembly that plugged into the original blower switch. Cut all but the brown

wire as far back as you can.

Cut the brown wire at the plug. And attach a male insulated spade connector.

Heater hoses

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

Keine Kommentare

Classic AutoAir Perfect Fit-Elite Series Betriebsanleitung Seite 8